About Wind Utilization
What is Wind utilization ?
There are many thousands of wind turbines operating, with a total capacity of 58,982 MW of which Europe accounts for 69% (2005). The average output of one megawatt of wind power is equivalent to the average consumption of about 160 American households. Wind power was the most rapidly-growing means of alternative electricity generation at the turn of the century and world wind generation capacity more than quadrupled between 1999 and 2005. 90% of wind power installations are in the US and Europe, but the share of the top five countries in terms of new installations fell from 71% in 2004 to 55% in 2005. By 2010, the World Wind Energy Association expects 160,000 MW to be installed worldwide, implying an anticipated growth rate of more than 15% per year.
Germany, Spain, the United States, India, and Denmark have made the largest investments in wind generated electricity. Denmark is prominent in the manufacturing and use of wind turbines, with a commitment made in the 1970s to eventually produce half of the country's power by wind. Denmark generates over 20% of its electricity with wind turbines, the highest percentage of any country and is fifth in the world in total power generation (which can be compared with the fact that Denmark is 56th on the general electricity consumption list). Denmark and Germany are leading exporters of large (0.66 to 5 MW) turbines.
Wind accounts for 1% of the total electricity production on a global scale (2005). Germany is the leading producer of wind power with 32% of the total world capacity in 2005 (6% of German electricity); the official target is that by 2010, renewable energy will meet 12.5% of German electricity needs — it can be expected that this target will be reached even earlier. Germany has 16,000 wind turbines, mostly in the north of the country — including three of the biggest in the world, constructed by the companies Enercon (6 MW), Multibrid (5 MW) and Repower (5 MW). Germany's Schleswig-Holstein province generates 35% of its power with wind turbines.
Spain and the United States are next in terms of installed capacity. In 2005, the government of Spain approved a new national goal for installed wind power capacity of 20,000 MW by 2012. According to trade journal Windpower Monthly; however, in 2006 they abruptly halted subsidies and price supports for wind power. According to the American Wind Energy Association, wind generated enough electricity to power 0.4% (1.6 million households) of total electricity in US, up from less than 0.1% in 1999. In 2005, both Germany and Spain have produced more electricity from wind power than from hydropower plants. US Department of Energy studies have concluded wind harvested in just three of the fifty U.S. states could provide enough electricity to power the entire nation, and that offshore wind farms could do the same job. Wind power growth was estimated at up to 50% in the U.S. in 2006, and has reached 11,603 MW of installed capacity for growth of 27% in one year.India ranks 4th in the world with a total wind power capacity of 6,270 MW. Wind power generates 3% of all electricity produced in India. The World Wind Energy Conference in New Delhi in November 2006 has given additional impetus to the Indian wind industry. In December 2003, General Electric installed the world's largest offshore wind turbines in Ireland, and plans are being made for more such installations on the west coast, including the possible use of floating turbines. The windfarm near Muppandal, India, provides an impoverished village with energy for work.
On August 15, 2005, China announced it would build a 1000-megawatt wind farm in Hebei for completion in 2020. China reportedly has set a generating target of 20,000 MW by 2020 from renewable energy sources — it says indigenous wind power could generate up to 253,000 MW. Following the World Wind Energy Conference in November 2004, organised by the Chinese and the World Wind Energy Association, a Chinese renewable energy law was adopted. In late 2005, the Chinese government increased the official wind energy target for the year 2020 from 20 GW to 30 GW. Another growing market is Brazil, with a wind potential of 143 GW. The federal government has created an incentive program, called Proinfa, to build production capacity of 3300 MW of renewable energy for 2008, of which 1422 MW through wind energy. The program seeks to produce 10% of Brazilian electricity through renewable sources. Brazil produced 320 TWh in 2004. France recently announced a very ambitious target of 12 500 MW installed by 2010.
Over the 7 years from 2000-2006, Canada experienced rapid growth of wind capacity — moving from a total installed capacity of 137 MW to 1,451 MW, and showing a growth rate of 38% and rising. Particularly rapid growth has been seen in 2006, with total capacity growing to 1,451 MW by December, 2006, doubling the installed capacity from the 684 MW at end-2005.This growth was fed by provincial measures, including installation targets, economic incentives and political support. For example, the government of the Canadian province of Ontario announced on 21 March 2006 that it will introduce a feed-in tariff for wind power, referred to as 'Standard Offer Contracts', which may boost the wind industry across the province. In the Canadian province of Quebec, the state-owned hydroelectric utility plans beside current wind farm projects to purchase an additional 2000 MW by 2013
Wind turbines have been used for household electricity generation in conjunction with battery storage over many decades in remote areas. Household generator units of more than 1 kW are now functioning in several countries.
To compensate for the varying power output, grid-connected wind turbines may utilise some sort of grid energy storage. Off-grid systems either adapt to intermittent power or use photovoltaic or diesel systems to supplement the wind turbine.
Wind turbines range from small four hundred watt generators for residential use to several megawatt machines for wind farms and offshore. The small ones have direct drive generators, direct current output, aeroelastic blades, lifetime bearings and use a vane to point into the wind; while the larger ones generally have geared power trains, alternating current output, flaps and are actively pointed into the wind. Direct drive generators and aeroelastic blades for large wind turbines are being researched and direct current generators are sometimes used.
In urban locations, where it is difficult to obtain large amounts of wind energy, smaller systems may still be used to run low power equipment. Distributed power from rooftop mounted wind turbines can also alleviate power distribution problems, as well as provide resilience to power failures. Equipment such as parking meters or wireless internet gateways may be powered by a wind turbine that charges a small battery, replacing the need for a connection to the power grid and/or maintaining service despite possible power grid failures.
Small scale turbines are available that are approximately 7 feet (2 m) in diameter and produce 900 watts. Units are lightweight, e.g. 16 kilograms (35 lbs), allowing rapid response to wind gusts typical of urban settings and easy mounting much like a television antenna. It is claimed that they are inaudible even a few feet under the turbine.Dynamic braking regulates the speed by dumping excess energy, so that the turbine continues to produce electricity even in high winds. The dynamic braking resistor may be installed inside the building to provide heat (during high winds when more heat is lost by the building, while more heat is also produced by the braking resistor). The proximal location makes low voltage (12 volt, or the like) energy distribution practical. An additional benefit is that owners become more aware of electricity consumption, possibly reducing their consumption down to the average level that the turbine can produce.
According to the World Wind Energy Association, it is difficult to assess the total number or capacity of small-scaled wind turbines, but in China alone, there are roughly 300,000 small-scale wind turbines generating electricity